How to Replace the Front Wheel Bearing on a 2012 Honda Accord

Replacing the 2012 Honda Accord front wheel bearing is a common repair that can be completed in a few hours with the right tools and knowledge. This guide will provide you with the step-by-step instructions you need to replace the front wheel bearing on your Honda Accord.

What are the Symptoms of a Bad Front Wheel Bearing?

The most common symptom of a bad front wheel bearing is a humming or grinding noise that increases in pitch as you drive. The noise may also be accompanied by vibration in the steering wheel or the floorboard. If you experience any of these symptoms, it is important to have your 2012 Honda Accord front wheel bearing checked by a qualified mechanic.

Tools and Materials

2012 Honda Accord front wheel bearing

Socket wrench

Torque wrench

Hammer

Punch

Pry bar

Step-by-Step Instructions

Safety First: Park your Honda Accord on a level surface and engage the parking brake.

Remove the wheel: Loosen the lug nuts on the front wheel that is making the noise. Use a jack to raise the front of the car and remove the wheel.

Remove the brake caliper: Unbolt the brake caliper from the steering knuckle and hang it out of the way with a bungee cord.

Remove the rotor: Remove the rotor from the wheel hub.

Remove the hub assembly: Remove the four bolts that hold the hub assembly to the steering knuckle. Use a pry bar to pry the hub assembly off of the steering knuckle.

Press out the old bearing: Use a punch to drive the old bearing out of the hub assembly.

Press in the new bearing: Press the new bearing into the hub assembly.

Reassemble the hub assembly: Reinstall the hub assembly on the steering knuckle and tighten the bolts to 110 ft-lbs.

Reinstall the rotor: Reinstall the rotor on the wheel hub.

Reinstall the brake caliper: Reinstall the brake caliper on the steering knuckle and tighten the bolts to 80 ft-lbs.

Reinstall the wheel: Reinstall the wheel and tighten the lug nuts to 90 ft-lbs.

Lower the car: Lower the car to the ground and remove the jack.

Test drive: Test drive your Honda Accord to make sure that the noise has been eliminated.

Tables

Symptoms of a Bad Front Wheel Bearing:

Symptom	Description
Humming or grinding noise	The noise may increase in pitch as you drive.
Vibration in the steering wheel or floorboard	The vibration may be more noticeable at higher speeds.
Loose or wobbly wheel	The wheel may move back and forth when you shake it.

Tools and Materials:

Tool	Description
Socket wrench	Used to remove the lug nuts and bolts.
Torque wrench	Used to tighten the bolts to the proper torque.
Hammer	Used to drive the old bearing out of the hub assembly.
Punch	Used to drive the new bearing into the hub assembly.
Pry bar	Used to pry the hub assembly off of the steering knuckle.

Success Stories

"I was having a humming noise coming from the front of my Honda Accord. I took it to my mechanic and he told me that I needed to replace the front wheel bearing. I followed the instructions in this guide and replaced the bearing myself. The noise is gone and my car is running smoothly again." - John S.

"I was driving down the highway when I heard a loud grinding noise coming from the front of my Honda Accord. I pulled over and saw that the front wheel was wobbling. I called a tow truck and had my car towed to a mechanic. The mechanic told me that the front wheel bearing had failed. I replaced the bearing myself using the instructions in this guide and the noise is gone." - Mary J.

"I am a single mother of two and I don't have a lot of money to spend on car repairs. When I heard a humming noise coming from the front of my Honda Accord, I was worried that it would be an expensive repair. I found this guide online and replaced the bearing myself. The repair only took a few hours and I saved a lot of money." - Sarah K.

FAQs

How long does it take to replace a front wheel bearing?

- The average time to replace a front wheel bearing is 2-3 hours.

How much does it cost to replace a front wheel bearing?

- The cost to replace a front wheel bearing varies depending on the make and model of your car, but the average cost is between $200 and $400.

Can I replace a front wheel bearing myself?

- Yes, you can replace a front wheel bearing yourself if you have the right tools and knowledge. However, it is important to note that this is a safety-critical repair and it should only be attempted by someone who is confident in their ability to do the job correctly.

How to Replace the Front Wheel Bearing on a 2012 Honda Accord